while trial fitting the blitz front bumper on my car, I noticed it didn't have a place for the bumper lights. i couldn't decide were to put them. so I just tucked them in the bumper brace( ghetto i know). then I came accross a post in here, the pics were of a cavy with amber lights in the bright light part of the headlights, BRILLIANT! so i did it too! anyway on with the pics:
i know the right turn signal is dim. i got to do some wiring there
watcha think?
_______________________________________________________
J-body.org Join date: Monday, January 21, 2002
AIM & Y!: COGcaviZ24
only thing i dont like are the fogs. they just stick out
eehh... i like my fog lights
_______________________________________________________
J-body.org Join date: Monday, January 21, 2002
AIM & Y!: COGcaviZ24
looks good but take the fogs out tho.. he is right they stick out lol.
__________________--------------------------____________________
Team: NONE RIGHT NOW
Sponsored By: Pro Trucks
Work Being Done By: creative customs
Stuff for Sell:
In person they dont stick out that much.. i think its the camera good work..
naw, the fogs stay. yeah, maybe it's the camera that makes seem off. or it might the fact that my headlight bulbs are very dim. i need to change them. i noticed while doing this project, the headlight bulb glass was distorted, like they got too hot. anyway, here are some pics without flash:
_______________________________________________________
J-body.org Join date: Monday, January 21, 2002
AIM & Y!: COGcaviZ24
found the person that did it first.
it was Frank the Tank
_______________________________________________________
J-body.org Join date: Monday, January 21, 2002
AIM & Y!: COGcaviZ24
Not on here much anymore. Sorry that I just now noticed it. lol
It looks sharp man!
I loved the way it looked on mine, and yours looks just as good!
Neutiquam erro.
thanks, frank
_______________________________________________________
J-body.org Join date: Monday, January 21, 2002
AIM & Y!: COGcaviZ24
ehh to bad that really cant be done with the sunfire blitz im still looking into options to mount my turnsignals
how much actual modifications were needed to complete the project? and did the turn signal wiring reach already...what did you do with the remaining high beam sockets???...i just bought new projectors and im reluctant to cut into them
Piece of cake mod.
I used a 1" (I believe) paddle bit and a cordless drill. measured off where I wanted the holes. I put mine in the corners closest to the center of the car. After I drilled the hole, I put the light socket in there and traced the outline for the locking tabs, then used a dremel to cut out the slots for the tabs. Put it in, twist, and voila!!
your high beams will still be there, and yes, the wires reached.
The only problem I came across was clearance. I had to take my headlight out to remove or install the turn signal bulbs.
COGcavi, if your directions are different, please post them.
Neutiquam erro.
Very nice. Almost like a Grand Am headlight.
the only problem is that i have new clear headlights (black housing projectors), so do you think it would look tacky with the bulb in there?
