Almost ^^^???
IT IS
Well...I need some more c/f in the interior...
I sprayed it black, then put on a thin coat of epoxy. In another hour from now it will become tacky enough for me to lay my c/f down.
Once I lay down some c/f I'll post up again with the progress of this piece.
I also did a large c/f order yesterday...I think I need to find some interest in some c/f goodies and start up some GP's
I was woundering if you were going to add more cf.......and then thought that the piece your working on now would look sweet in cf...and here you are doing it in cf
Ill be waiting for update pics lol
Can't wait to see it finished in CF Vince. You have me on the CF GP let me know when and where.
Edited 1 time(s). Last edited Tuesday, April 14, 2009 5:16 PM
FOR SALE
Well, I have the c/f applied now. I'm going to let the base cure fully before moving forward. I work the afternoon shift tomorrow, so by the time I get home I should be able to put down my first flood coat of resin on this bad boy.
All I have to say is, I love it
I took two pics...one with a flash, and one without a flash.
With the flash on:
With no flash on:
I'll get some more pics of this piece as I continue to work on it. I'm thinking of other pieces I can start wrapping in c/f now too
.
God d
amn that's hot! I'd like you to wrap part of my dash in cf!
-Markus
2002 Yellow Cavalier LS Sport
Check it out! -->
Flickr
with all the contours its going to look so bad ass.. love it.
That looks yummyy
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
thats freaking sick looking
RIP JESSE GERARD.....Youll always be in my thoughts and prayers...
Thanks guys.
I have 2 layers of epoxy down now. Once this one hardens, I'm going to give it some sanding then apply a final coat.
I have two pics again.
Keep in mind the parts that don't have a nice gloss/coat are the areas I will be cutting out for the dvd player and xbox.
I'm really excited about this piece once I finish it off over the weekend
.
new piece looks sick. wish i could get my 3 gauge pillar pod done to match my other pillar. gonna cost way too much for me at this time. lovin the cf. mooooooorrreeee.
____________________________________________________________________________
my carDomain updated 3/13/09 Forged by B-day!
Looks hot man! PM me when your ready bout those injector covers.
wtf... some things are just TOO good. you are a champ!!!
as discussed last night, looks sick vince!! i want cf bits for the 2ngen
watch for flying sparks!!!
^ let me know which parts. I hope to go to the junkers in a little while and I'll pick up some stuff to create some molds.
Well not much for pics...not much work done. I've done my final layer of epoxy this morning. I'm busy today and working Saturday...so Sunday morning before work I'll trim the excess carbon off and snap some more pics of this beast of a piece
.
looks like ur carbon work is getting better and better! the weave looks almost flawless in those pics!
Im more excited to swing by and get my interior quoted.... PM me your number...
"Louis, you better watch who you call a child. Because if I'm a child,
that makes you a pedafile, and I'm not gonna stand here and argue
with a pervert" -- Peter Griffin
^ Once I trim the excess off I will take pics of every angle. The weave is flawless! I know what I am doing now...my trial and error period in carbon fiber is over.
PM sent buddy.
you the man! am tempted to get some interior pieces wrapped by you.. damnit. and i know i know for the pics, you gotta nag me hard like i did to you before. lol
i still do enjoy seeing the progress thus far since very beginning to now.
This just gets more retarded (In a good way) by the day lol! Crazy work man, looks amazing.
" To study and not think is a waste. To think and not study is dangerous. "
Well I said Sunday I'd have new pics to post up.
Soooo it's Sunday afternoon and I have great news...Pics to post up
.
The carbon fiber piece is now completed! I sanded and trimmed the excess material away today and did a test fit in the car again.
The epoxy resin is NOT sanded smooth yet!!! A light sanding and then some automotive clear will make this bad boy shine!
I'm extremely pleased with how well this piece turned out
My next step is to begin blocking the primer work.
FOOK!!!
I N V U SOOO MUCH
you should wrap the 360 face plate in CF too!
Or paint it one of the body colors,
but god damn that piece is sexy
Keep it up,
LOVE the updates
looks good yo yo. Looks like everythings coming together nicely man!
yummy vince just yummy !!!!
looks @!#$ awesome vince!!!! as many times as i said it. your def an inspiration man. as for the cf. are you using the 2x2 twill? looks great either way.
I NEED a 97-99 LD9 engine harness for an auto.PM if u hav info.!!
