Time to get down and dirty once again - Page 17 - Photos & Media Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Re: Time to get down and dirty once again
Tuesday, February 24, 2009 10:48 AM
this is retarded..... how many other threads need to be ruined first 2 pages on my for sale thread and now this...... yet both Vince and I would think of you two as good friends take it to pm solve your @!#$ or move on




Re: Time to get down and dirty once again
Tuesday, February 24, 2009 10:54 AM
Your right Bummrz...............

Page 17 is a new page lets get back to the man of the housr VINCE!!!!!

Bummrz when you picking it up!!!! I will even pay for the gas to get the trailer to his house!
Re: Time to get down and dirty once again
Tuesday, February 24, 2009 3:51 PM
Okay...

This little rant from everyone is done and over with...shake hands, hug, kiss...whatever you wanna do


As for THIS post!...

Guess what?!!?!??!! I've been working day shifts this week, and haven't been able to get back to work on my car !!!!

I'll try to get a little something done Wednesday night and I'll post up some pics no matter what!!!

Wednesday night, pics will be posted up!!!







Re: Time to get down and dirty once again
Tuesday, February 24, 2009 3:58 PM
* grabs vince slaps him!*


I am soooooooooooooo sick and tired of you excuses!!!!! I want pics now!!!!!!!!!!!!!!!!!
Re: Time to get down and dirty once again
Tuesday, February 24, 2009 6:15 PM
Poppa- man the ride looks great keep up the good work, the dash, floor, enclosure all looks excellent. I agree with someone who said to carbon fiber the floor a bit like mats then paint around them, it would just flow really well with the rest of your car. Also if you sell this car ever I will slap you very very hard, so hard you wont feel like a man any more. You might end up feeling like Micheal Jackson he lost his gender a long time ago. You've fiberglassed everything that I wanted to so far, so it's like I get to see it before I try it. Also does the fiberglass roll actually have a foam roller that goes on it. Just wondering because mines metal and I couldn't find a roller for it or anything.

I personally think you (poppa) and bummerz have two of the nicest j's... but there are a lot of good one's on here, like that dude that got the northstar in... what was that dudes name he had the pics of the install as well...

Any hoot keep up the excellent work!



Re: Time to get down and dirty once again
Tuesday, February 24, 2009 9:20 PM
You should CARBON FIBER THE WHOLE EXTERIOR!!! Be the few be the proud be.... CARBON POPPA!!!..... actually that would be awesome, expensive but awesome I though about doing this but I'm poor and knowing my luck I would get in an accident.



Re: Time to get down and dirty once again
Tuesday, February 24, 2009 10:46 PM
CyCloNe! wrote: Also does the fiberglass roll actually have a foam roller that goes on it. Just wondering because mines metal and I couldn't find a roller for it or anything.





Rollers are metal so u can "roll" out the bubbles under the fiberglass when or just after you apply resin. Rollers worked wonders for me once i discovered a technique. NOT sure if thats what ur asking BUT I just wanted to give my 2 cents
Re: Time to get down and dirty once again
Wednesday, February 25, 2009 7:42 AM
Jason- Thanx for the reply bro... what I was trying to say is you know how for house paint you have the metal roller and then you have to buy the foam roller pad that slides over it, I was just wondering if the fiberglass rollers need a foam pad/roller to go onto it.





Re: Time to get down and dirty once again
Wednesday, February 25, 2009 11:29 AM
CyCloNe! wrote:Jason- Thanx for the reply bro... what I was trying to say is you know how for house paint you have the metal roller and then you have to buy the foam roller pad that slides over it, I was just wondering if the fiberglass rollers need a foam pad/roller to go onto it.


Not as far as i kno
Re: Time to get down and dirty once again
Wednesday, February 25, 2009 11:33 AM
Correction Clicky here are some! so vince, its wednesday
Re: Time to get down and dirty once again
Wednesday, February 25, 2009 12:49 PM

C/F the whole exterior...haha I'm 1/2 way there..!

Lets see some new pics Vincer..!




Re: Time to get down and dirty once again
Thursday, February 26, 2009 5:54 AM
big poppa wrote:Okay...

This little rant from everyone is done and over with...shake hands, hug, kiss...whatever you wanna do


As for THIS post!...

Guess what?!!?!??!! I've been working day shifts this week, and haven't been able to get back to work on my car !!!!

I'll try to get a little something done Wednesday night and I'll post up some pics no matter what!!!

Wednesday night, pics will be posted up!!!




Thought I might highlight that for you!
Re: Time to get down and dirty once again
Thursday, February 26, 2009 8:47 AM
ya I am with George wtf man !!! I am on strike from checking this out till pics are available



Re: Time to get down and dirty once again
Thursday, February 26, 2009 8:59 AM
Listen Vince!

Were like addicts! and your the dealer! and when you say a day!!!! it better be up!!!!!

I vote we grab the pitch forks and the shovels meet at a central location, and head up to vince's I know where he lives and we will stone him until he posts pics and gets back to work!
Re: Time to get down and dirty once again
Thursday, February 26, 2009 10:27 AM
I'm not in Canada but I just my torch ready.... burn baby burn!! ]:->



Re: Time to get down and dirty once again
Thursday, February 26, 2009 6:29 PM
I clicky and see no picky?



FOR SALE
Re: Time to get down and dirty once again
Friday, February 27, 2009 4:30 AM
GET THOSE PITCH FORKS SHARP BOYS!!!!!!!!

WERE GONNA HAVE US AN OLD FASHION STONEIN!!!

AN ENTIRE 2 DAYS LATE!!!! There better be a brand new widebody on the car at this rate dam it!
Re: Time to get down and dirty once again
Friday, February 27, 2009 6:47 PM
Vince...






No more excuses.

Sanding block + you = Happy JBOfans.

Don't let us down.



Re: Time to get down and dirty once again
Friday, February 27, 2009 6:57 PM
zdoubledozen wrote:Sanding block + you + camera = Happy JBOfans.

Fixed.





Re: Time to get down and dirty once again
Saturday, February 28, 2009 5:55 AM
Quiklilcav wrote:
zdoubledozen wrote:Sanding block + you + camera + actually posting promised pics = Happy JBOfans.

Fixed.

...and again .



Re: Time to get down and dirty once again
Monday, March 02, 2009 8:55 AM
UMMM Vince! we were just kidding about the stoneing and the pitch forks!!!....

Were gonna give you one more day and then file a missing persons report with the local athuroitys!

Re: Time to get down and dirty once again
Monday, March 02, 2009 8:56 AM
ok so the real reason Vince hasnt done anything is cause he sold the car to me hense me selling my car...






















































































hahaha Just kidding how many people just had a heart attack



Re: Time to get down and dirty once again
Monday, March 02, 2009 9:28 AM
Justin you made me cry..... butthole



Re: Time to get down and dirty once again
Thursday, March 05, 2009 9:43 AM
Alrite sooooo ummmm all jokes aside at this point!


I hope Vince is alright!
Re: Time to get down and dirty once again
Thursday, March 05, 2009 9:49 AM
or maybe hes busy?



Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search