QBE (73H 800573D 0N3) wrote:NJHK (The JBO Negro) wrote:QBE (73H 800573D 0N3) wrote:migging? no he is nigging
You are doomed to look for a race joke in any conversation...I hope you don't do that at your new job...
I did.. no one works there thats black or puerto rican... priobly because its a hrd job with constant moving,,,
lol I love you adam I am only kidding
Yeah right...you're such an undercover racist lol
If you were in the 1950s, you'd have a ball with all the nigger jokes in the world lol
www.kronosperformance.com / 732-742-8837
vroooooooooooooooooooooom!!!!!!!!
but yes, mig welded pipes. then they'll be ground down and wire wheeled to a shine
honestly though adam black people don't bother me...
but the jokes are funny you gotta admit that
LE61T PTE6262 Powered 
Slammed Ohv (Baby Lenko) wrote:but yes, mig welded pipes. then they'll be ground down and wire wheeled to a shine
dont want to tell you how to do something but make sure there is no extra wire that made its way into the pipe that will be deadly to the turbo and motor take your time no one will die if time is taken
^^^^^^ Scott tackled cutting and tacking the passenger side and I did the driver's side. I just finished welding all the pipes shut and I have Adam grinding down my welds to search for any little pin holes there might be. I was careful to make sure no wire went through in the center of the pipe since there is no way to check, I'm going to be shoving a heavy wire brush through just in case.
I talked to phil about the oil feed and it looks easy enough since Adam brought the correct fitting with him. That is why I ad Adam pull the intake manifold. I woke up at 7am yesterday to prepair for the install and only get around 4 hours of sleep last night.. so I am taking a little nap. When Adam wakes me I will be dropping the oil pan and clocking the center section.
I hate to say it but the problems with the turbo manifold are totally true. The T3 flange needs to be over to the left about 2" and the wastegate flange should stick just straight up instead of being on an arm and hung to the side.
Asside from all the troubles the manifold has made, my steel cutting table saw bit blew up, I had to make a T3 gasket from 1/16" aluminum, we had to convince the firewall to move back a little bit, had to get some sensors for MS at the junkyard and my mig welder skipped town on me. We had to tack the charge pipes with a stick arc until a loaner mig came in from a friend of mine.
I have had some very good help with this project mainly from Scott (baby lenko) who I had never met until yesteday and Randy (randeazy). Tyler (Ryoko-bird) made a guest appearance today and mounted the intercooler and my cousin Justin (on the ord but rarely posts) stopped by to stand around and look pretty. My friend Floyd has been around helping out and Terry (Jackalope) stopped by today to show some love too. RC came by too and she tried to touch me while I was sleeping (you would have to be hear.)
We have an awesome group of people hanging around the garage so pleeeeease feel free to stop by anybody... Cause I'm a fire man.. a fire man... robbed a jewlery store-told me make me a grill!
Cardomain|
Myspace
I woke him up...he's taking a shower and we'll be back to work. I finished grinding down the welds also.
We'll keep everyone posted but this is gonna be an all nighter without a doubt.
Peace, love and wish us luck.
www.kronosperformance.com / 732-742-8837
guest apperance
, i didinint know i was that important.
TURBO4DOOR.....comming soon to a street near you!!!
props ya'll for the long hours and hard work. can't wait to see the finished product.
congrats Adam.
Desert Tuners
“When you come across a big kettle of crazy, it’s best not to stir it.”
Happy for ya Adam. Glad it's finally happening. Now when do I get to hear it?
good luck ya'll
looks like a grand ole time
Looks like you guys are having fun
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD
AUTOMATIC!!
328 HP
306 TQ
M I N I O N - Sinbird wrote:^^^^^^ Scott tackled cutting and tacking the passenger side and I did the driver's side. I just finished welding all the pipes shut and I have Adam grinding down my welds to search for any little pin holes there might be. I was careful to make sure no wire went through in the center of the pipe since there is no way to check, I'm going to be shoving a heavy wire brush through just in case.
I talked to phil about the oil feed and it looks easy enough since Adam brought the correct fitting with him. That is why I ad Adam pull the intake manifold. I woke up at 7am yesterday to prepair for the install and only get around 4 hours of sleep last night.. so I am taking a little nap. When Adam wakes me I will be dropping the oil pan and clocking the center section.
I hate to say it but the problems with the turbo manifold are totally true. The T3 flange needs to be over to the left about 2" and the wastegate flange should stick just straight up instead of being on an arm and hung to the side.
Asside from all the troubles the manifold has made, my steel cutting table saw bit blew up, I had to make a T3 gasket from 1/16" aluminum, we had to convince the firewall to move back a little bit, had to get some sensors for MS at the junkyard and my mig welder skipped town on me. We had to tack the charge pipes with a stick arc until a loaner mig came in from a friend of mine.
I have had some very good help with this project mainly from Scott (baby lenko) who I had never met until yesteday and Randy (randeazy). Tyler (Ryoko-bird) made a guest appearance today and mounted the intercooler and my cousin Justin (on the ord but rarely posts) stopped by to stand around and look pretty. My friend Floyd has been around helping out and Terry (Jackalope) stopped by today to show some love too. RC came by too and she tried to touch me while I was sleeping (you would have to be hear.)
We have an awesome group of people hanging around the garage so pleeeeease feel free to stop by anybody... Cause I'm a fire man.. a fire man... robbed a jewlery store-told me make me a grill!
Take that back, I never touched your banana while you slept.......you worn't sleeping when I've been there the past 2 days bitch! ahah
looking pretty good man. cant wait to see it when its done
Josh that wasn't Kim it was Floyd. Since you were sleeping and he couldn't find any 13 year old girls and Kim wasn't around he HAD to feel somebody up or his day wouldn't be complete. Odd thing is that if he thinks you look like a 13 year old girl what kind of girls has he been chaseing ? (shrug) Adam it was nice meeting you and poking you with that stick was loads of fun for all
. Anyway dude guess what just came out yesterday for sale ? The GM superchager kit ! Wooo Hooo ! You should have waited. But it's only been released and they have none available just yet.
So you guys any closer to getting done ?
Semper Fi SAINT. May you rest in peace.
I have a idea...lets boost my car next LOL!!! no im effing serous i WANT BOOST!!!!!
....and i want a GRILL(dose a gangsta pose)
TURBO4DOOR.....comming soon to a street near you!!!!!
Terry...you should have seen the looks Floyd gave Josh! Like he wanted him to go to sleep!
Ryoko-Bird92, Im sure some people here wouldn't mind helping!
congrats guys.. I did not get any phone calls during the night so I am assuming everything went ok!
hit me up later!
LE61T PTE6262 Powered
Soooo Floyd wants Joshes bod huh? ( shakes head and sighs ) Thats wrong on so many levels I don't even know where to begin.
Semper Fi SAINT. May you rest in peace.
lol yes! Then Josh grabbed Adam and everything was ok again! lol
except that one call, at 1AM where we asked you what to gap the plugs at
so i'm hoping if the manifold was that crappy that you guys fabbed up a support bracket so that all the weight of the turbo isn't riding on it.... Wish I coulda been there to lend a hand but work is too crazy right now, looks pretty damn good though
Arrival Blue 04 LS Sport
Eco
Turbo
Megasquirt
'Nuff said
Lookin' sick man.....Wish I could have headed down for a bit to help out......
