i have a few questions about injectors that i could only find a few small things about on here.
im going to for 600whp out of a t67 turbocharger and was wondering what size injector i should use?
i was looking for the biggest high impedance injector that is made and i keep seeing 750cc injectors, do they make any bigger than that?
if not would 1000cc low imp injectors handle the power and how would i go about making the low imp injectors run hi imp, i know you need a resistor, but what size and watt and everything and is there a diagram i could follow to run the wiring? also are there any drop-in 1000cc injectors that fit the 02 eco fuel rail without any spacers?
i recently found 850cc hi imp side feed injectors. i know that the fuel is coming into the side of the injector, would it be too hard to make an eco side feed for the injectors?
you guys let me know. any help is greatly appreciated
like for the side mounts, would i be able to fab an sr20 fuel system or rb25 fuel system to work on the eco?
Edited 1 time(s). Last edited Wednesday, August 13, 2008 2:11 PM
i put this in the boost forum because it has to do with injectors for boost, so if this is in the wrong forum then please move it mods.
or would it not matter since the EMS system im going to use supports both Low and High Impedance injectors. i will still have my stock ecu piggybacked with full MSD ignition to run ignition and normal systems in teh car like the gauges and stuff, but the Spectre EMS will control all fuel and timing and everything. so with this ems will i still need resistors or could i just drop in 1000cc low imp injectors and then use my EMS to tune it right. sorry for the triple post before anyone responded lol
i kept thinking of stuff
Edited 1 time(s). Last edited Wednesday, August 13, 2008 4:09 PM
does nobody know any answers to my questions???
u could run a set of resistors to the 1000cc's..i belive that what we did
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
would 1000cc injectors handle 600whp?
or would i even need restrictors with the spectre ems since it can handle both hi and low imp injectors
Edited 1 time(s). Last edited Thursday, August 14, 2008 7:33 PM
Bonnett aka Pancake wrote:would 1000cc injectors handle 600whp?
or would i even need restrictors with the spectre ems since it can handle both hi and low imp injectors
SINCE IT CAN HANDLE BOTH HI AND LO IMP..U JUST ANSWERED YOUR OWN QUESTION..LOL
Built&Boosted moar
04 Cavalier Turbo r.i.p my baby
2nd place 2009 GM tuner bash qwick 8--holla
i sort of did, but the restrictor part isnt answered since i will still have my stock ecu
