hey people i am looking for arp head gaskets and head bolts for boosting my cavy it is 98 z24 2.4 i want to know what psi can i run on stock engine and what things need to be changed to run like 6 to 8 psi please help me out you can add my to msn messenger rockafilla157@hotmail.com
the general rule of thumb is 6psi is ok on stock internals to be run reliably. sure, theres quite a few out there running much more and still ok, but they usually end up blowing up.
WHAT DOES THAM MEAN look at the faqs i am new at this eh
Jazer {AzulKav} Turbo Chica wrote:SweetnessGT wrote:z yaaaa wrote:the general rule of thumb is 6psi is ok on stock internals to be run reliably. sure, theres quite a few out there running much more and still ok, but they usually end up blowing up.
Do explain where this "general rule of thumb" came from, Brad?
-Chris-
x2 
Please not the "How much psi on stock internals" debate AGAIN. We all know this is dependant on many things such as but not limited to AFR, timing, octane of gas, condition of engine prior to boost ect. Besides we all know psi is only a measure of resistance and that the cfm a setup flows is what is really important not psi.
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
i believe it was all in sarcasm
ok when you guys done arguing can some one awser my questio please hahaaa
ARP doesn't make Head Gaskets.
Go to the top of the Boost Forums and read the "
STICKY" that applies,make a new list and come back and ask questions.
"The FACTS are always subject to CHANGE once the TRUTH is applied"
"In the entire history of man the only stupid questions are the ones that don't get asked"
hey i was told i need some injectors like 400 or somthing what can i get them out of any help please i need these to run 10 psi
no acctually i was going by what GM thought was good enough to maintain a factory warranty... but whatever.
the rule of thumb is: when you're putting half a highway on various srt4's, it just might be too much
Blew it up, build numbers coming soon
98redcavz24 (LD9Stunner) wrote:the rule of thumb is: when you're putting half a highway on various srt4's, it just might be too much
LOL But it made for great videos.
FORGET GIRLS GONE WILD WE HAVE GOVERNMENT SPENDING GONE WILD!
hey guys what i realy need to know is i am goign to run about 7 8 psi i need to know what to do with timing and i need to know exactly what to run conserning fuel right from stock that would be gratly apreciated
fill out your car info and we could help you further.
if your car is a 00-02 with a 2.4 go get the gm reflash and you should be good for your 7-8psi, run the highest octane you can.
i have the hpt stand alone willthat not do the same thing
hpt is not a stand alone...i think you might have to do a touch of reading in the stickies at the top of the page..it ill help alot and aggervate people less..
well i didnt mesan to aggervate any body i am new at this so i dont realy feel like @!#$ up i thought thats what thi was for HELP if you feel like that then dont awser my question i am sure i can find some one else to help me out
sorry to agervate you
