ok, um, I have a question about turbo my cavy, I have change my mind about air ride it, so now I want to turbo my 2.2 ohv cavy, but there one conditions I just want to push it to 6 or 7 psi for my cavy, and i'm pickin up couple parts from a friend tommorrow like the Bov and turbo it off a WRX, it was on his z24 cavy, it not a T3 or t3/t4oe turbo or whatever, but I got the the down pipe and custom turbo manifold, so pleased help me out here give me a list of what I need to turbo my cavy thanx
Thanx Jbo.org
read the sticky's at the top of the page and then post
*2012 mazdaspeed3*
Be careful... the 95 is a side feed fuel injector setup (which there are no known higher flow ones)... so pay close attention to the fuel, you may have to do a top feed injector conversion...
also if the manifold is for a z24. it will not bolt up to your car...either will the down pipe..and honestly you can turbo your car with that turbo, but it won't be very efficient, thats a small turbo.. tdo4h i beleive
the turbo I have is a T25 IHI turbo so what do I need to do guys!
what is a top feed conversion?
Since your just getting interested in turboing ur cav, take some time to do a few searches in the forums, and read what others have to say. Its not going to be as easy as you think, What are you going to do for fuel management and tuning? As for the top feed conversion....you will find out if you search and there are pics for that as well.............
The turbo is a TD04. If it is off of a wrx it's a 16G if its the STi than its the 18G. I run the same turbo on my 2200. And honestly its ALOT of work to piece this turbo to our cars. No one makes manifolds that fit our car's using this turbo. This is going to be a costly build up seeing as everything is going to have to be custom made. Good luck and any question feel free to email me away.
