I had an a JRC intecooler, right beofre he stoped making them actually. but now thanks to the lovley people of new jersy, Im in the market for a new one. and since jrc isnt making them any more, I cant rember, or look up the size I used.
so for the hell of it, what are you intercooler specs. height length width type
and pics, mainly becuase it really puts things in reference.
"
Kick azz is my boost hero!!! 
"
they stole your front mount?
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
Mines 28x8x3
~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ
26.75 x 6.25 x 3.5
http://myslips.com/external/steven/pics/sexy2.jpg
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
One Gal, bottle.
or did you meen air to air?
Chris
'02 Z-24 Supercharged
13.7 @102.45 MPH Third Place, 2007 GMSC Bash SOLD AS OF 01MAR08
dont take this as a thread jack but have you considered using a stock srt4 intercooler or maybe a stock evo intercooler?
yeah but from what? its not like there cheaper.
acer, they riped it right the @!#$ off. they even took as much charge tube as they could.
the main reason Im asking all this, is becuase Im trying to figure out how big I can get away with. it looks like if I stay below 40 inch, im fine.
"
Kick azz is my boost hero!!! "
I will measure tomorrow and post how big you can use, I think I am
8x24x3
HP Tuners | Garrett T3/T04B | 2.5" Charge Pipes | 2.5" Downpipe | 650 Injectors | HO Manifold | Addco front/rear | Motor Mounts | HKS SSQV | Spec stage 3 | AEM UEGO Wideband | Team Green LSD | FMIC | 2.3 cams | 2.3 oil pump swap | 280WHP | Now ECOTECED
what are you doing to prevent it from happening again?
how was it mounted up before?
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
I had the front bumper off
but they just lifted up the cover, and yanked it off. I was surprised, becuase our house is in avalon. its one of the nicest towns in NJ.
so yeah it was kinda my fault, but that doesnt make it right
"
Kick azz is my boost hero!!! "
nothing makes it right.. did you have it bolted on to your car? welded? hanging there?
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
bolted. but it wasnt enough. they just saw it and riped it right off. I should of guessed. jersy is shuch a crappy place
"
Kick azz is my boost hero!!! "
Jcavi wrote:the main reason Im asking all this, is becuase Im trying to figure out how big I can get away with. it looks like if I stay below 40 inch, im fine.
Depends on how far you can set it back, too. I wouldn't go past 35" with the way mine is mounted, I'm having enough problems at 31".
-
Interior FAQ -
J-Body of Michigan -
I just ordered a 28 so its no big deal.
I still wanna see fitmint pics. it would be a good adition to this site.
"
Kick azz is my boost hero!!! "
