new 6x9 ... plug in? - Audio & Electronics Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
new 6x9 ... plug in?
Wednesday, May 25, 2005 10:16 AM
ok, i got to the speakers now, but how do i get my new pioneer 6x9's (picture) to plug into the plug for my old speakers (picture)? or do i have to modify it somehow? any quick answer would be great. i want to finish these before i go to work.
btw, i know the pics are kinda bad...
thanx in advance






* * BIG FOR SALE POST * *

Re: new 6x9 ... plug in?
Wednesday, May 25, 2005 10:23 AM
you can buy plugs that use friction lugs to attatch to the speaker and plug into the stock wires

or i'm assuming you could cut the plug off and just solder the wires on


Re: new 6x9 ... plug in?
Wednesday, May 25, 2005 10:26 AM
so i can just go to napa and get a plug that plugs into my stock plug and fits onto my new speaker?



* * BIG FOR SALE POST * *
Re: new 6x9 ... plug in?
Wednesday, May 25, 2005 11:11 AM
if you remove the tape, you should see that the wires were just cut and then attached the plug-in piece, you wont need the plug-in piece! attch the wires directly to the speakers
Re: new 6x9 ... plug in?
Wednesday, May 25, 2005 6:50 PM
Cut the plug off and wire it directly to the speaker. I would recommend getting a soldering iron and solder the contacts, that way the wires wont come off with excessive vibration and jumping.




Re: new 6x9 ... plug in?
Wednesday, May 25, 2005 7:13 PM
Yup just cut em off if you plan on using the stock wires.




Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search