some 2.2 parts for sale - North East Region Forum
Forum Post / Reply
You must log in before you can post or reply to messages.
my roommate was gonna change his automatic 2.2L to a 5spd. but instead sold the whole car before we got a chance, so i have parts sitting around, they need to go!
--ECM for manual
--wiring harrness ( some plugs are missing, not exactly sure which ones are missing )
--tranmisson (painted black )
--shift assembly w/ linkage cables and all
--clutch pedal assembly
--clutch
--flywheel
--stock front bumper ( white )
--intake manifold ( 2.2 )
--stock air box
--center consol peice for a 5spd ( just the peice around the shifter NOT the whole consol, and its NOT for power window switch ).
--also 2.4L ECM from a 97 (manual)
--stock springs from my 98 z24
--autometer sport comp 5" tach w/ shift light
--autometer water temp gauge 2-1/16 ( still in box, never used, has intstructions and all the hardware needed )
--Jet Performance air/ fuel "power" chip w/ book for install instructions
--interior peices ... doors, center consol, back panels ( around the windows ) front and rear seats. The doors, center consol, and rear panels are pretty bad.. painted at one point but not good at all so everything chipped off... but they'll be good for anyone looking to paint it the right way or fiberglass them or whatever projects. the interior peices were all at one point tan and gray, seats just need cleaned bad. doors also have spots for power locks but i dont have the switches for them anymore.
I can email pics of anything... just let me know and give me price, i just want this stuff gone! I live in York, PA ... i would prefer not to ship but will depending on what.
Jason AOL - QwikCav24
damn i wanted to buy that car.....
1989 Turbo Trans Am #82, 2007 Cobalt SS G85
ok, what year is the ECM out of?
and how much for the pedals assembly, and the shift assembly...
SPONSORED BY: CAVALIER EXTREME
also my car is a 1995, and i got a isuzu tranny getting rdy to swap in...
whats the difference of putting a OBD-2 ECM in it when my car came equipped with a OBD-1?
and how much for the wiring Harness? are they different from a auto's?
SPONSORED BY: CAVALIER EXTREME
email sent
L8r...
____________
. . . . jb . . . .
...Son Fire!
*** Need some 1995 Cavalier parts ???
*** FOR SALE: doors, windows, interior, engine parts, fenders, etc. -- email me!
jb..... i got no email yet?!?!
95cavblue..... ecm is out of a 96. i'm not sure whats involved from going to OBD-I to OBD-II. thats a good question. and as far as the parts.... just email me w/ a price and we'll see.
also FYI the interior peices are from a 2 door
Huh. That's weird, I sent it early this morning at 12:21 am. Oh well, it is posted below:
-----------
Jason,
Which " --autometer sport comp 5" tach w/ shift light" is it (silver or black face)? Does it have the monster shift light?
Do you know the model #? How old is it and what kind of shape? Any pix?
Thanks a lot!
Btw, if we work out a deal, I could meet you someplace as I live in Elizabethtown...
Let me know.
-----------
L8r...
____________
. . . . jb . . . .
...Son Fire!
*** Need some 1995 Cavalier parts ???
*** FOR SALE: doors, windows, interior, engine parts, fenders, etc. -- email me!
i'll take a pic and email it to you
and yea if you want we can meet up somewhere, i used to live in e-town... so i know the area pretty well
jason
yea so how bout my pedals? and wiring harness?
SPONSORED BY: CAVALIER EXTREME
95CavBlue - i pulled out the wiring harness today.... i cant sell that thing... sorry i didnt relize exactly how plugs it was missing.... so i dont know if its any good... i'll prolly throw it out. and the clutch pedal assmbly... i dont know, i have pics if you want, just throw a price at me and we'll see
JB, i sent you an email this morning w/ pics
Got your email, thanks!
I'll look for the new pix.
Double-check on the backside/underside if you would... There has to be a model # somewhere on that bad boy... It kind of looks like one of the 39xx series.
Did you have this hooked up to a DIS-II? Or did you use a tach driver to hook it up to the GM coils? Summit is selling the MSD driver for about $70... Ouch.
L8r...
____________
. . . . jb . . . .
...Son Fire!
*** Need some 1995 Cavalier parts ???
*** FOR SALE: doors, windows, interior, engine parts, fenders, etc. -- email me!
i need the pedals..
and i need the housings that the tranny mount inserts go in...
do you have any of this?
Give me a price i have cash in hand
SPONSORED BY: CAVALIER EXTREME
Bumpin the post up..... FYI sold the tach. i still have the pedal 95cavblue JUST the clutch pedal.
I need interior door panels....both passenger and driver
Go Premium, it builds character!
the door panels are missing the carpet in the arm rest.... their half painted... they'd only be good for doing your own project.... if you cant meet me somewhere i'd let 'em go for $30
email me @ Qwikcav24@aol.com
Jason
sorry I need stock ones....not painted
Go Premium, it builds character!
hey jason, you have a coolant reservoir by any chance?
Event - no sry i dont.
Oyyci - hows $50 sound????
- Jason
Jas, to jump in -- Event, I have one from a 95 2.2... Let me know.
L8r...
____________
. . . . jb . . . .
...Son Fire!
*** Need some 1995 Cavalier parts ???
*** FOR SALE: doors, windows, interior, engine parts, fenders, etc. -- email me!
jb, long as its one for a third gen, all i need from it is a few measurements on how much liquid it holds
email me what it is exactly that you need and I'll get you the info...
L8r...
____________
. . . . jb . . . .
...Son Fire!
*** Need some 1995 Cavalier parts ???
*** FOR SALE: doors, windows, interior, engine parts, fenders, etc. -- email me!
hey jason its me again, lol anyways you got a starter just laying around off a 2.2 i could have??? my bro just got a new cavi and starter is about to go!
Jb.... no problem man
Chris.... sorry man.... i dont have one
Forum Post / Reply
You must log in before you can post or reply to messages.
