Patriot Performance Head - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
Patriot Performance Head
Thursday, March 30, 2006 8:34 AM
well ill probly be purchasing their P&P head in like 2 weeks so basically i just wanted to know how much better does it flow then a stock head? i know the site says its for like the 99 and blow but they said theyd do one for me and like what is the stock flow? ill be getting the bare head so i can get oversized valves put in at a local shop here.


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com

Re: Patriot Performance Head
Thursday, March 30, 2006 8:40 AM
The Patriot heads outflow the stock heads by a huge margin in most cases. All depends what components you decide to use too.

Give me a call and maybe I can get you a better price than they told you.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Patriot Performance Head
Thursday, March 30, 2006 9:22 AM
i just wanna get their bare assembly so i can get the 1mm oversized valves with the 1.6:1 magnum chromoly springs then the locks and retainers from JBP along with the lifters from them.


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com
Re: Patriot Performance Head
Thursday, March 30, 2006 9:24 AM
how much can u get it cheaper? the guy told me 645 shipped for the bare


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com
Re: Patriot Performance Head
Thursday, March 30, 2006 5:45 PM
?


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com
Re: Patriot Performance Head
Thursday, March 30, 2006 9:14 PM
Dillon Zellmer wrote:i just wanna get their bare assembly so i can get the 1mm oversized valves with the 1.6:1 magnum chromoly springs then the locks and retainers from JBP along with the lifters from them.


You know you would have to get the head machined to put the oversized valves in, right?



www.kronosperformance.com / 732-742-8837

Re: Patriot Performance Head
Thursday, March 30, 2006 9:14 PM
oops...didn't hit e-mail notification...



www.kronosperformance.com / 732-742-8837

Re: Patriot Performance Head
Thursday, March 30, 2006 9:45 PM
get what machined?


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com
Re: Patriot Performance Head
Thursday, March 30, 2006 9:51 PM
Dillon Zellmer wrote:get what machined?


The Cylinder Head.



www.kronosperformance.com / 732-742-8837

Re: Patriot Performance Head
Thursday, March 30, 2006 10:02 PM
Valve seats.



Re: Patriot Performance Head
Thursday, March 30, 2006 11:09 PM
teh Sunfires... (Tom) wrote:Valve seats.


Sorry, that's what I meant.



www.kronosperformance.com / 732-742-8837


Re: Patriot Performance Head
Friday, March 31, 2006 4:33 AM
lol, hit up Ryne, AKA hypsy, he got me a great price on PAtriot's "stage 2" assembled head and he's becoming very reputable and i have great service with him. Thanks Ryne
Re: Patriot Performance Head
Friday, March 31, 2006 4:36 AM
hmm, btw (need edit button) i would highly consider just getting the assembled head from PAtriot, JBP as of late has been getting a bad wrap and their work has been shotty at best. I believe it'll be much cheaper to get PAtriot's stage 2 with +1mm valves assembled through TeamVisionRacing and just buy your tougher springs and locks somewhere cheaper, like anywhere but JBP.
Re: Patriot Performance Head
Friday, March 31, 2006 8:09 AM
i know i gotta get the valve seats redone he said he would do it for 10 bux a valve so it sounded pretty cheap. if hypsy can get me it cheap with oversized valves already i'd do that unless it more expensive then havin it done here.i dont really know where to buy the other stuff. just get the assembled head and put SS valves in with brand new stock stuff? if theres other places that sell stuff for the same price or less is more likely please tell me!! i need to get this stuff ordered soon so i can get the new motor in my car and break it in before summer hopefully. only take 3000 miles to break in right?


2.340 - 60,
16.591 @ 80.52 - 1/4

Guesswho69000@hotmail.com
Re: Patriot Performance Head
Friday, March 31, 2006 10:19 AM
I'll reply to you ASAP. I spent the day with my g/f and then spent the night sick at her house. I'll shoot you an email with some prices as soon as I get caught up on some stuff. Racing starts tomorrow and I gotta get all my crap together.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Patriot Performance Head
Friday, March 31, 2006 5:03 PM
Hey Ryne, I know it's not listed on your web site, but what brands of valve train equipment can you get, if any?





Re: Patriot Performance Head
Friday, March 31, 2006 10:32 PM
I haven't fully investigated everything I can get yet. Send me a list of what you need and I'll see what I can do for you.

Dillion: shoot me an email so I can discuss your needs with you a little more.



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Patriot Performance Head
Saturday, April 01, 2006 11:07 PM
May I ask what do you have on your engine to make it a 12 sec car? 2.2 or 2.4?
Re: Patriot Performance Head
Saturday, April 01, 2006 11:19 PM
DYLE SWAN wrote:May I ask what do you have on your engine to make it a 12 sec car? 2.2 or 2.4?


He has a Turbocharged ECOTEC. Those times were WITHOUT engine work.



www.kronosperformance.com / 732-742-8837

Re: Patriot Performance Head
Sunday, April 02, 2006 11:23 AM
What he said ^^^^ Got the Patriot head for this year and I'm getting a set of better tires so I'm looking or low 12s or 11s



I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Re: Patriot Performance Head
Sunday, April 02, 2006 12:32 PM
http://www.j-body.org/forums/read.php?f=2&i=298424&t=294683#298424

Might find this thread of interest too. Chevy High Performance mag. made 20whp with the stage 1 head and cams



Click the banner to enter the best Quad4 & Twin Cam site on the internet.

Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search