ECOTEC PROGRAMMER!!! - Performance Forum

Forum Post / Reply
You must log in before you can post or reply to messages.
ECOTEC PROGRAMMER!!!
Wednesday, September 28, 2005 4:58 PM
anyone seen this:Eco Programmer
it seems like this is the same as what the hptuners will be but ive never seen it i just saw it on the eco website. So whos gonna buy it and tell us if its good?

Re: ECOTEC PROGRAMMER!!!
Wednesday, September 28, 2005 5:07 PM
i think this has been posted before>>>
?\??????

cool none the less


<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_sunfire.gif">
<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_personal_pic.jpg">
Re: ECOTEC PROGRAMMER!!!
Wednesday, September 28, 2005 5:23 PM
That has MANY less features than HPT will have, and at twice the price.





4cyltuner.com - Information Source For 4 Cylinder Tuners
Buy stuff from CarCustoms Ebay! Won't be disappointed!

Re: ECOTEC PROGRAMMER!!!
Wednesday, September 28, 2005 6:10 PM
any idea when hpt will be out?


________________________________________________________________

Click My Sig For My Website
Re: ECOTEC PROGRAMMER!!!
Wednesday, September 28, 2005 6:13 PM
its another mistake, i called Hypertec about those, they say they dont exist. Look on the hypertec website, you wont find it anywhere. And when i called hypertec about it, they said it was a mistake and that they do not suuport the jbody platform and have no plans too.


2006 Black Cobalt SS Supercharged G85
13.91@102.77
Re: ECOTEC PROGRAMMER!!!
Wednesday, September 28, 2005 7:28 PM
WELL HOW KIND OF THEM!!!
-JaysonZ24- wrote:its another mistake, i called Hypertec about those, they say they dont exist. Look on the hypertec website, you wont find it anywhere. And when i called hypertec about it, they said it was a mistake and that they do not suuport the jbody platform and have no plans too.




15.71 @ 87.9mph 9-17-05
Re: ECOTEC PROGRAMMER!!!
Thursday, September 29, 2005 5:29 PM
Victor 70mm and 75mm race throttle bodies can be easily adapted to a wide variety of applications. We eliminated the idle air motor mount and all unnecessary vacuum tubes, making these throttle bodies especially well suited for racing applications. The throttle arm has a cable wheel with multiple take-off points. They are cast and fully machined by Edelbrock, then assembled by Magneti Marelli USA. Shipped complete and ready to run with a throttle position sensor installed and pre-set, these throttle bodies can be adapted to a number of applications using our 1/2" thick spacer/adapters. Intake port matching may be required in some cases. Matching Spacer/Adapter required for mounting to manifolds with stock throttle body bolt pattern.
Re: ECOTEC PROGRAMMER!!!
Thursday, September 29, 2005 5:32 PM






Whats a Cavalier?
Re: ECOTEC PROGRAMMER!!!
Thursday, September 29, 2005 5:34 PM
your a dumbass
Re: ECOTEC PROGRAMMER!!!
Thursday, September 29, 2005 5:39 PM
good thing i am a genius, here i go........

The Predator for 2004 All V8 Vehicles (part no. U7193) is a state-of-the art high performance tuning flash programmer, which advances the timing, optimizes the air/fuel ratio and remaps the transmission shift points (in automatic transmissions). Unlike other 'tuners', the Predator’s programming is performed in very small increments throughout the entire RPM range, for a smoother, wider and a more predictable power delivery.



· Lifetime Warranty!

· Screen Size that is 300% larger than the competition

· Quicker programming (takes approx. 2 min.)

· Custom Files can be downloaded from internet which allows for future updates and customized programming

· OBD-II diagnostic software (includes live data monitoring of MPH, RPM, IAT, ECT, LTFT, STFT, O2 voltage, timing, knock retard detection, as well as many other sensors

· Eliminates CAGS (Skip Shifting) on the 6-speed manual transmissions

· Revised Torque Management Settings for optimum performance

· User adjustability. The user can set their own parameters, choose from the Predator's performance program, have a custom performance program made for you by a Predator Tuner or create your own:

a. Richen or lean fuel mixture
b. Advance or retard ignition timing
c. Raise and lower shift points in 10 RPM increments
d. Raise and lower rev limiter in 10 RPM increments
e. Reduce shift duration (time delay during gear change) (+/- 25% and anywhere in between)
f. Increase or decrease shift firmness (+/- 25% and anywhere in between)
g. Correct speedometer for gear changes and/or tire sizes
h. Turn on cooling fans at lower temps in incremental steps of 1 degrees (for vehicles w/ factory equipped electric fans)
i. Adjust top-speed limiters.



The Predator allows the end user to adjust the following parameters:

· Timing Table 2000-4000rpm (+15/- 20

· Timing Table 4000-7000rpm (+15/- 20

· Fuel Table 2000-4000rpm (+/- 20

· Fuel Table 4000-7000rpm (+/- 20

· Idle (+ 500rpm / -300rpm)

· Speed Limiters (Trucks Only)

· Rev Limiters

· RPM Shift Points

· MPH Up and Downshifts

· Shift Timing

· Shift Pressure

· Cooling Fan ON and OFF temperatures

· Re-Calibrate Speedometer for Gear and Tire Size Changes



The Predator is the most advanced tuning programmer available today. It has taken the hand-held programmer to a new level. You will notice quicker acceleration and better throttle response. If you have an automatic transmission, the Predator will also give you a firmer, more responsive shift pattern (gas vehicles only at this time). The Predator will raise your rev limiter as well as it allows you to raise your top end speed limiter if you have installed high speed rated tires.



A unique feature of the Predator is that is allows you, the user, to “fine tune” Predator's program. Since vehicles are located at different elevations or different weather climates, the way the vehicle responds to the Predator program may vary (not all vehicles are exactly alike). Some vehicles will see better gains than others and some may see better (or worse) gains than advertised. This is due to the fact that not all vehicles respond exactly the same. Now, here’s the good news…If you're not totally satisfied with the way Predator program performs, the Predator allows you to make your own adjustments to the program. For example: If you feel that the shift points are too firm, you can go into the program and lower the transmission line pressure (gas vehicles). If you feel that you can benefit from a higher shift point rpm, you can go into the program and raise shift points. If you feel that you will benefit from a few more degrees of ignition timing, you can go into the program and add some timing (gas vehicles). The Predator allows you to "fine tune" the Predator program to meet your specific requirements.



The Predator has diagnostic abilities near identical to GM’s Tech2 software. The predator will allow you to read diagnostic trouble codes (DTC), erase DTC’s and perform live data monitoring. You can monitor your engine sensors while driving your vehicle and much more. The Predator will save the original GM program so if at any time you want to go back to the original factory specifications, it will allow you to do so.
Re: ECOTEC PROGRAMMER!!!
Thursday, September 29, 2005 6:26 PM
too bad we dont have v8's


<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_sunfire.gif">
<img src="http://registry.gmenthusiast.com/images/snowman/thumbnail_personal_pic.jpg">

Re: ECOTEC PROGRAMMER!!!
Friday, September 30, 2005 7:45 AM
to bad he cant read either, IT DOESNT EXIST, ITS A MISTAKE! I CALLED HYPTUNERS! THEY TOLD ME THAT!


2006 Black Cobalt SS Supercharged G85
13.91@102.77
Re: ECOTEC PROGRAMMER!!!
Friday, September 30, 2005 7:55 AM
durrrrrrrrrrrrr



1989 Turbo Trans Am #82, 2007 Cobalt SS G85





Forum Post / Reply
You must log in before you can post or reply to messages.

 

Start New Topic Advanced Search