I see some of you guys running a 25"+ size resonator WITH a cat.. Now Ive looked under my car and it doesnt seem like a 25" resonator let alone a 29" will fit under there WITH a cat? Am I just blind and it will fit with no clearance issues or what? lol

Does anybody have pictures of this kind of setup..? Thanks.









~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

you mean 19 right...

it should fit right after the cat..


"Silver 2001 Cavalier z24 5 speed 2 door sunroof and power everything "

AEM Short Ram Intake
B&M Short Throw Shifter

when i was under the car with the exhaust guy. he said the only way to put my 28" res. on is to move the cat forward a little

i have a 30 inch on mine...

thats 30 inches all resonator...with tips (which mine didnt come with, it would easily be a 35 inch...

like said, move the cat forward slightly... mine is moved 1.5 inches...

i moved my cat right to the downpipe bend and then put a 24" res. right after that and i had about 1 1/2 ft to go after that my cat was 14" long

No, I do mean 29" I was reading a registry on here and thats what he said he had in there.

Thanks guys I didnt realize or think that you could move the cat up to get the resonator to fit.









~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ

with custom, you can do anything

I have a 26" magnapack, and I was able to keep my cat in its stock position.

it takes a lot of exhaust reconstruction, and practically eliminating most of the B pipe that comes with your header... but it can always be done if you want quiet quiet exhaust.




I was a retard, and now I'm permanently banned.

david, if you wanna get it done i know a guy that'll do a complete catback exhaust for 60. thats who i used and i got 2.5" lol. im going to have him do my 3" also, if he can bend it lol



2000 Camaro V6.
| SLP Loudmouth | CAI Intake | HID's |

ZStreetCavSC wrote:david, if you wanna get it done i know a guy that'll do a complete catback exhaust for 60. thats who i used and i got 2.5" lol. im going to have him do my 3" also, if he can bend it lol

Will do Mat.. Also Stephen on OT does custom exhaust as well if you need him to.









~2014 New Z under the knife, same heart different body~
______________________
WHITECAVY no more
2012 numbers - 4SPD AUTOMATIC!!
328 HP
306 TQ