just wondering who has hit mid 12's in the Jbody? and what kind of hp numbers were they putting down.... yes im sure if really searched for it could find it but i tryed for a bit and im not resourting to this...
The First Twin Charged jbody
blue car (R.I.P) - 240whp @7psi..
silver car - 305whp 315lbs.tq @15psi (91 Octane) or 420whp & 425lbs.TQ @20psi (94 octane+Alcohol Injection)
All dynos run on a Mustang dyno
I hit a 12.4
then they told me it was 1/8th lol
joking i havent ran it down the track yet lol
this might help you
and that was only at the top of this very forum
Im a Xbox 360 fanboy...and damn proud of it!!
No one has ever hit 12s in a J. Are you crazy?
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
99redz24 wrote:this might help you
and that was only at the top of this very forum
i hit high 12's
and im auto!
i dynoed 250ish when i dynoed, but at the track i had higher boost (1 or 2 psi) and DR and Race gas and other shiz
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
I believe the question was meant to be worded:
"Of those who have hit mid 12's, what horsepower were you putting down."
-
"Youth in Asia"...I don't see anything wrong with that.
my buddy in his 1989 z24 puts down mid 12's all day and hes running a RMT turbo on his stock 3400 v6 and putting down 325 hp on 11 psi of boost.
99redz24 wrote:this might help you
and that was only at the top of this very forum
Read the stickys newbie
Edited 1 time(s). Last edited Wednesday, January 10, 2007 2:08 PM
- 93 mph in the 1/8 mile
Member of J-Body Of Michigan.
chris nuse wrote:my buddy in his 1989 z24 puts down mid 12's all day and hes running a RMT turbo on his stock 3400 v6 and putting down 325 hp on 11 psi of boost.
There's no such think as a stock 3400 in a JBody. There ARE 3.1 and 3x00 adaptations. The 3400 is a complete swap and not "stock." If someone puts a 100% bone stock 3400 into a J they're an idiot, especially boosting it. Your going through all that work to put it in, you might as well build it up first.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Team Vision Racing (aka hypsy) wrote:chris nuse wrote:my buddy in his 1989 z24 puts down mid 12's all day and hes running a RMT turbo on his stock 3400 v6 and putting down 325 hp on 11 psi of boost.
There's no such think as a stock 3400 in a JBody. There ARE 3.1 and 3x00 adaptations. The 3400 is a complete swap and not "stock." If someone puts a 100% bone stock 3400 into a J they're an idiot, especially boosting it. Your going through all that work to put it in, you might as well build it up first.
ur not going to tell me wat hes got its 100% stock 3400 with a remote turbo heres the link,
z24 cavi stock 3400
chris nuse wrote:Team Vision Racing (aka hypsy) wrote:chris nuse wrote:my buddy in his 1989 z24 puts down mid 12's all day and hes running a RMT turbo on his stock 3400 v6 and putting down 325 hp on 11 psi of boost.
There's no such think as a stock 3400 in a JBody. There ARE 3.1 and 3x00 adaptations. The 3400 is a complete swap and not "stock." If someone puts a 100% bone stock 3400 into a J they're an idiot, especially boosting it. Your going through all that work to put it in, you might as well build it up first.
ur not going to tell me wat hes got its 100% stock 3400 with a remote turbo heres the link,z24 cavi stock 3400
Ok...but it's not a STOCK MOTOR FOR THE CAR.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
you are an ignorant person chris nuse.
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
12.7 @ 6 psi, with a junk 2.6 60'. on a tune where i wouldnt idle id say taht was damn good. right now im running 9 psi and i dyno'd 358WHP and 365tq. im sure with a good 60, and traction i would have hit an 11.7 ish
358whp,365tq @9 psi
http://www.youtube.com/watch?v=7ibU1k8UZoo
turbo3400z wrote:12.7 @ 6 psi, with a junk 2.6 60'. on a tune where i wouldnt idle id say taht was damn good. right now im running 9 psi and i dyno'd 358WHP and 365tq. im sure with a good 60, and traction i would have hit an 11.7 ish
im pretty sure he was looking for results in a 2.2l ecotec, 2.2l non eco, 2.4l. or 2.3l, etc
|Forged 8.9:1 Wiseco Pistons|Forged Eagle Rods|HPTuners|60trim|Tial Wastegate|
|Precision Intercooler|2.5" Exhaust|2.5" Charge Pipes|630CC Mototron Injectors|
|Stock: Fuel Pump, Transmission, Manifold, TB, Head, Head Gasket, Ignition, Suspension...|
Team Vision Racing (aka hypsy) wrote:chris nuse wrote:Team Vision Racing (aka hypsy) wrote:chris nuse wrote:my buddy in his 1989 z24 puts down mid 12's all day and hes running a RMT turbo on his stock 3400 v6 and putting down 325 hp on 11 psi of boost.
There's no such think as a stock 3400 in a JBody. There ARE 3.1 and 3x00 adaptations. The 3400 is a complete swap and not "stock." If someone puts a 100% bone stock 3400 into a J they're an idiot, especially boosting it. Your going through all that work to put it in, you might as well build it up first.
ur not going to tell me wat hes got its 100% stock 3400 with a remote turbo heres the link,z24 cavi stock 3400
Ok...but it's not a STOCK MOTOR FOR THE CAR.
@!#$ man even I realized what he ment its a stock 3400 motor as in no after market parts but the turbo setup. Nop where did he say it was a stock cavi motor. Seriously you need to @!#$ calm down and get off your I know all @!#$ trip.
Disclaimer:
Dey see me Trollin' Dey hatin' for trollin dey trying to catch me ridin dirty.
lol, yea and hes running a remote setup which is even better and hes pushing 325 hp to the wheels with only 11 psi!!!!
Cavie Freak wrote:Team Vision Racing (aka hypsy) wrote:chris nuse wrote:Team Vision Racing (aka hypsy) wrote:chris nuse wrote:my buddy in his 1989 z24 puts down mid 12's all day and hes running a RMT turbo on his stock 3400 v6 and putting down 325 hp on 11 psi of boost.
There's no such think as a stock 3400 in a JBody. There ARE 3.1 and 3x00 adaptations. The 3400 is a complete swap and not "stock." If someone puts a 100% bone stock 3400 into a J they're an idiot, especially boosting it. Your going through all that work to put it in, you might as well build it up first.
ur not going to tell me wat hes got its 100% stock 3400 with a remote turbo heres the link,z24 cavi stock 3400
Ok...but it's not a STOCK MOTOR FOR THE CAR.
@!#$ man even I realized what he ment its a stock 3400 motor as in no after market parts but the turbo setup. Nop where did he say it was a stock cavi motor. Seriously you need to @!#$ calm down and get off your I know all @!#$ trip.
I knew exactly what he meant. Why the @!#$ would the OP care about someone who did a motor swap into a 2G car?
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
he said 12's and he didnt specify wat he wanted he just said in a jbody so @!#$ off.
chris nuse wrote:he said 12's and he didnt specify wat he wanted he just said in a jbody so @!#$ off.
I think I will go rub one out. Thanks for the advice.
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
And the most awkward post of the month goes to............
Team Vision Racing (aka hypsy) wrote:
I think I will go rub one out. Thanks for the advice.
Sunfires... eh (Tom) wrote:And the most awkward post of the month goes to............
Team Vision Racing (aka hypsy) wrote:
I think I will go rub one out. Thanks for the advice.
He told me to @!#$ off. So I did just that
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
Roofy wrote:Team Vision Racing (aka hypsy) wrote:He told me to @!#$ off. So I did just that
Ummm, I hope you washed afterwards.
@!#$ no. Are you crazy?
I used to race cars, now I race myself.
5K PB: 24:50
10K PB: 54:26
