ok well i had a bit of an accident....

i kinda killed all 4 of my rod bearings..... so now i need a machine shop that can fix up my crank, and bore and clean my block.

I live in cleveland, but willing to drive a lil ways if the place is good....

if they can port the oiling system for better flow... or do the mods for the 2.3L oil pump conversion too that would be awesome...

here is a link to my post about the oops...

http://www.j-body.org/forums/read.php?f=11&i=135331&t=135331

try this one it's a guy who's on the V-Rod forum I frequent. he does some pretty crazy stuff, he should be able to get you fixed up.

Hutter Performance in Cardon, OH
If you talk to Trevor tell him the retard with the teal cavalier and crank pulleys sent you.


PRND321 Till I DIE
Old Motor: 160whp & 152ft/lbs, 1/4 Mile 15.4 @88.2
M45 + LD9 + 4T40-E, GO GO GO

You already asked this

I thought this sounded familair........




Jason
99 Z24 Supercharged
157hp/171tq - NA
LD9 for Life

K&b machineing in north olmsted... he does good work real cheap. 440-777-2490