I installed my cams, and changed my fuel rail to a nice clean one. After everything was put back together and timing was checked, car will turn over but does not start. I am not sure where to check, the only thing i can think of is to do the passlock relearn, but i am not sure why i would need to do that cause i dont think anything that i changed would cause it to lockup. must add its in an ecotec

Fuel related most likely. As long as you ahve your cam lined up correctly.

----------------------------------------------------------------
www.bradsairsoft.com

campostion sensor maybe


THERE CAN BE ONLY ONE, i have already died once and im still here so lets just leave it on the track

check for fuel leaks then do the passlock and that should work


GMR has got nothing on this